Precautions for installing waterproof cable joints

May 14, 2026

Leave a message

(1) Select appropriate connector materials according to the required cable connector model and specifications. The quality of cable connector materials varies greatly nowadays, but to ensure quality, it is recommended not to be tempted by cheap prices and to choose materials from reputable cable connector manufacturers.

 

(2) It is best to avoid cable jointing on rainy days, as water ingress can severely affect the cable's lifespan and may even cause short circuits.

 

(3) Before making waterproof cable joints, carefully read the manufacturer's product instructions. This is especially important for 10kV and above cables. Plan all procedures before proceeding.

 

(4) For the terminal joint of 10kV and above single-core armored cables, remember that only one end of the steel tape should be grounded.

 

(5) Do not apply too much force when crimping the copper tube; just crimp it into place. The crimped copper end face will inevitably have many protrusions; these must be smoothed with a file to remove any burrs.

 

(6) When using a blowtorch for heat-shrinkable cable joints, be careful to move the blowtorch back and forth; do not continuously blow in one direction.

 

(7) The dimensions of the cold shrink cable joint must be made strictly in accordance with the drawings, especially when removing the support in the reserved tube, extra care should be taken.

Send Inquiry
Send Inquiry