Product Overview
Single Phase Connectors are electrical connection components used in single-phase electricity metering and low-voltage distribution assemblies. They provide connection interfaces for conductors within compatible electrical equipment.
For meter manufacturers, electrical distributors and OEM buyers, product selection depends on electrical ratings, terminal configuration, conductor compatibility and installation requirements.
Key Selection Considerations
• Electrical Ratings: Rated voltage and current must match the intended electrical system.
• Terminal Configuration: Connection positions and terminal arrangements must match the equipment design.
• Conductor Compatibility: Check supported conductor materials, cross-sectional areas and connection methods.
• Installation Requirements: Confirm mounting dimensions and wiring arrangements before ordering.
• Product Consistency: Consistent product dimensions and approved specifications are important for equipment assembly and repeat purchasing.
-
Single Phase Interference Connector 60AYou want your equipment to pass EMC tests without a struggle. The Single Phase Interference Connector 60A helps you achieve that. It is a compact terminal block that has a built‑in EMI filter....
-
Single Phase Clearance Connector 60AWhen a lightning strike or a switching surge hits your power line, you need immediate protection. The Single Phase Clearance Connector 60A gives you that safety. It is an all‑in‑one surge...
-
Single Phase Interference Connector Outward 60AOur single phase interference connector outward 60A is a high‑performance, output‑side EMI filtering terminal block specifically designed to suppress conducted electromagnetic interference...
Electrical Specifications
Electrical specifications determine whether a single phase connector is suitable for the intended metering or distribution application.
Buyers should confirm the following information for each product model.
|
Product Name |
Single Phase Connectors |
|
Application |
60A single-phase residential & commercial energy meter wiring |
|
Rated Voltage / Current |
230V AC single-phase / 60A continuous duty |
|
Electrical Clearance |
≥ 8mm, per IEC 60947-1 for low-voltage systems |
|
Creepage Distance |
≥ 12mm, reliable under humid and contaminated conditions |
|
Dielectric Withstand |
2.5kV AC for 1 minute, no breakdown |
|
Insulation Resistance |
> 100MΩ at 500V DC |
|
Compatible Wire |
1.5mm² – 16mm² solid or stranded copper wire |
|
Meter Wiring Hole Depth |
12mm, secure deep insertion into meter terminals |
|
Stripping Length / Screw Torque |
10mm / 1.0–1.2 N·m |
|
Conductive Parts |
High-purity electrolytic copper, tin-plated |
|
Insulation Housing |
UL94 V-0 flame-retardant engineering plastic |
|
Ingress Protection |
IP54, dust and water-splash resistant |
|
Anti-Tamper |
Built-in security seals against unauthorized access |
|
Customization |
OEM/ODM supported per customer drawings |
|
Quality Guarantee |
12-24 months from shipment date |
|
Delivery Ports |
Ningbo Port / Shanghai Port |
|
Quote Turnaround |
Within 24 hours |
Important Selection Factors
Technical specifications should be confirmed against the datasheet for the selected model.
Rated Voltage and Current
Verify the connector ratings against the electrical system requirements.
Conductor Size
Confirm the supported conductor cross-section to ensure compatibility with the intended wiring.
Connection Method
Check the actual terminal design and conductor fixing method.
Dimensional Requirements
Compare product drawings with the installation space and equipment interface.
Connection Design
The terminal arrangement and connection structure determine how a connector interfaces with conductors and electrical equipment.

Terminal Arrangement
Check terminal positions, spacing and connection layout against the intended wiring configuration.

Conductor Connection
Confirm the supported conductor type, cross-sectional area and fixing method according to the product design.

Contact Components
Check contact dimensions, material specifications and surface treatment requirements against the approved product drawings.

Mechanical Structure
Verify the housing dimensions, component positioning and mounting arrangement before integrating the connector into an electrical assembly.
Product drawings and actual samples can be used to review connection details before bulk purchasing.
Product Materials & Construction
Material specifications and component construction are important when evaluating electrical connectors for equipment assembly and sourcing.
Conductive Components
Confirm the conductive material, material grade and surface treatment according to the selected model.
Insulating Components
Check the insulating material specification against the electrical and environmental requirements of the intended application.
Mechanical Components
Verify terminal dimensions, housing structure and component interfaces against approved drawings.
Product Specifications
Material grades, component dimensions and construction details should be documented in the product specification or technical drawing.
Installation & Compatibility
Before placing an order, buyers should verify that the connector matches the intended electrical equipment and wiring requirements.
Electrical Compatibility
Check rated voltage, rated current and applicable system requirements.
Conductor Compatibility
Confirm conductor material, cross-sectional area and supported connection method.
Equipment Interface
Compare terminal positions, mounting dimensions and connection arrangements with the equipment drawings.
Installation Requirements
Check wiring procedures, conductor preparation and tightening requirements for the selected model.
For projects involving existing equipment, buyers can provide technical drawings or samples for dimensional and structural compatibility review.
Quality Control
Product inspection should follow the approved specifications and actual manufacturing procedures.
For single phase connectors, relevant quality control items may include:

-
Material Verification
Check incoming materials against the specified material grades and purchasing requirements.
-
Dimensional Inspection
Verify critical dimensions and terminal configurations against approved product drawings.
-
Component and Assembly Inspection
Check component condition, positioning and assembly details.
-
Finished Product Inspection
Verify product appearance and applicable electrical characteristics according to the defined inspection requirements.
Verify product appearance and applicable electrical characteristics according to the defined inspection requirements.
OEM & Customization
For electrical distributors, meter manufacturers and equipment suppliers, product configurations may need to match specific equipment or project requirements.
Customization can be evaluated based on the following information:
Product Dimensions
Required dimensions and structural details.
Terminal Configuration
Terminal positions and connection arrangements.
Material Specifications
Required conductive and insulating materials.
Technical Drawings
Reference drawings, dimensions or existing product samples.
Packaging and Identification
Product labels, model identification and packaging requirements.
Order Quantity
Estimated purchasing volume and repeat order requirements.
Provide your drawings, samples or technical specifications for a product configuration review.

Request a Quote
Looking for single phase connectors for electricity metering or low-voltage distribution equipment?
Send us your product requirements to discuss suitable models, technical specifications and bulk purchasing options.
Information to Include in Your Inquiry
Product Model: Required model or reference number, if available.
Electrical Requirements: Rated voltage and current.
Conductor Requirements: Conductor material and cross-sectional area.
Connection Requirements: Terminal configuration and connection method.
Technical Drawings: Product dimensions, wiring layout or reference samples.
Order Quantity: Estimated quantity and purchasing frequency.
Our team can review your requirements and discuss product specifications, configuration options and order arrangements.
We are one of the most professional single phase connectors manufacturers and suppliers in China. With a professional production team, we are able to meet the needs of the majority of our customers. Please feel free to wholesale bulk high quality single phase connectors from our factory. Customized orders are welcome.
Single Phase Clearance Connector 60A, single phase connectors, Single Phase Interference Connector Outward 60A










