Product Introductio
The Single Phase Interference Connector 60A,high-end power entry device addresses the chronic market challenges of intricate terminal split-wiring and severe signal distortion. By embedding a high-attenuation C-L-C filtering network directly within a space-saving terminal architecture, this 60A continuous-current connector systematically neutralizes incoming conducted emissions. Operating at a maximum of 250VAC/DC, it functions as a definitive gatekeeper against powerline harmonics from 150kHz to 30MHz, shrinking physical control cabinet footprint requirements by up to 40% compared to traditional discrete configurations.
Core Technical Edge
Advanced Polymer Polycarbonate Housing: Moving away from standard bakelite frames that are prone to fracture and insulation degradation from ambient moisture, this series utilizes an advanced polymer polycarbonate injection mold. It yields exceptional structural impact strength, anti-aging properties, and an elite flame-retardant rating (UL94 V-0).
Patented Combination Slot Terminals: The wiring interfaces are equipped with we proprietary composite combination slot screws. Field operators can effortlessly apply maximum tightening torque with either standard flathead or Phillips-head screwdrivers, creating a vibration-resistant joint.
Low Earth-Leakage Engineering: While the standard setup keeps earth leakage under an excellent ≤0.5mA threshold, an optional medical-grade execution drops this value to ≤0.1mA to ensure total compliance with strict critical care power distribution regulations.
Technical Parameters
| Parameter | Value |
| Rated Current | 60A continuous |
| Rated Voltage | 250VAC / 250VDC |
| Circuit Type | Single‑phase (L+N) or L+N+PE (ground) |
| Filter Topology | C‑L‑C (capacitor‑inductor‑capacitor) |
| Insertion Loss (typical) | ≥20dB (150kHz – 30MHz); full curve available |
| Leakage Current (250VAC/50Hz) | ≤0.5mA (standard); ≤0.1mA (medical type) |
| Wire Range | 10mm² – 25mm² (8‑4 AWG) copper |
| Terminal Type | Tubular screw (torque ≥1.2 N·m) or spring‑clamp |
| Housing Material | Metal shell + PA66 (UL94 V‑0) terminal base |
| Operating Temperature | -25°C ~ +85°C (extended -40°C ~ +100°C on request) |
| Storage Temperature | -40°C ~ +105°C |
| Mounting | Panel mount (screw) or DIN rail adapter (optional) |
| Dimensions (L×W×H) | Typically 140×95×45mm (varies by model) |
| Standards Compliance | CE‑EMC, UKCA, RoHS, IEC/EN 60939 |
Strategic Application Scenarios
This input-side filter connector is specifically designed to guard the front-end electricity supply lines of multi-axis servo networks, commercial switching power supplies, and heavy-duty variable frequency drives (VFDs). Additionally, due to its specialized anti-interference and zero moisture absorption characteristics, it provides a stable and secure connection shield for automated industrial controllers, grid-tied solar power controllers, and sensitive hospital diagnostic hardware.
Quality & Compliance Standard
Every connector is manufactured within an ISO 9001 certified environment and carries the mandatory China Compulsory Certification (CCC) mark alongside global CE and UKCA stamps. The internal C-L-C circuit guarantees a steady insertion loss of ≥20dB tested under standard IEC 60939 criteria. This data allows original equipment manufacturers (OEMs) to drastically accelerate their complete system's electromagnetic compatibility (EMC) approval process.
Hot Tags: single phase interference connector 60a, China single phase interference connector 60a manufacturers, suppliers, factory, Single Phase Clearance Connector 60A, single phase connectors, Single Phase Interference Connector 60A, Single Phase Interference Connector Outward 60A
