Technical Specifications

| Parameter | Specification Standard |
| Component Type | Custom Switch & Socket Contact Terminal |
| Base Materials | C1100 Pure Copper / C2680 Brass / C5191 Phosphor Bronze |
| Material Thickness | 0.20 mm – 2.50 mm (Customizable) |
| Production Method | Progressive Die Stamping & Precision Bending |
| Plating Options | Matte/Bright Tin (3–5µm), Nickel (2–4µm), Silver (1–3µm), Selective Plating |
| Contact Geometry | Flat Contact, Wiper Spring, Socket Clip, Piercing Terminal |
| Tolerance Class | ±0.02 mm on critical dimensions |
Engineering Capabilities & Customization Scope
Material Selection
- C1100 Pure Copper: ≥98% IACS conductivity for high-current relays and wall switch terminals.
- C2680 Brass: Balanced mechanical strength and electrical performance for standard domestic power outlets.
- C5191 Phosphor Bronze: High fatigue resistance and spring retention for multi-insertion socket jaws.
Tooling & Stamping
- In-house progressive die design for high-volume automated production.
- Bending angle control within ±0.5° to guarantee insertion force limits.
Surface Coating
- Post-stamping barrel or continuous strip plating.
- Micro-inch layer thickness controlled to pass 48-hour salt spray corrosion testing and maintain solderability.
Standard off-the-shelf contacts often fail to match proprietary socket housings or thermal load targets. Production is structured entirely around customer-supplied CAD drawings (STEP/DWG) or physical samples.
Custom Stamped Contact vs Standard Off-the-Shelf Terminal
| Evaluation Criteria | Custom Stamped Contact | Standard Off-the-Shelf Terminal |
| Housing Compatibility | Tailored to custom switch geometry and pin pitch | Restricted to standard modular sizes |
| Spring Fatigue Life | Calculated elasticity for target insertion cycles | Generic spring rate with unknown cycle limits |
| Current Carrying Capacity | Optimized contact area to prevent local overheating | Fixed cross-section area; limited load adjustment |
| Assembly Integration | Includes custom mounting tabs or locator pins | Requires extra mounting hardware or adaptors |
Manufacturing & Quality Control Process
- DFM & Tooling Setup: Technical drawing review, press force calculation, and progressive die fabrication.
- Raw Material Inspection: Verification of coil thickness, hardness range, and alloy composition certificates.
- Automated Stamping: High-speed press runs with continuous inline optical inspection for critical dimensions.
- Secondary Plating: Chemical cleaning and precise electroplating based on layer thickness requirements.
- Quality Sign-off: Contact resistance testing, spring force measurement, and plating adhesion checks before packing.
Application Range
Technical FAQ
Q: What information is required to receive a formal quotation?
A: Submit 2D/3D CAD files specifying material grade, required thickness, plating type, and estimated annual order quantity. If drawings are unavailable, physical samples can be scanned to produce manufacturing prints.
Q: How is spring tension verified on socket contact jaws?
A: Spring force is tested using force-displacement gauges on initial samples. Die geometry is adjusted during trial runs to ensure insertion and extraction forces remain within target limits over repeated cycles.


Hot Tags: custom copper/brass switch socket contact parts, China custom copper/brass switch socket contact parts manufacturers, suppliers, factory












