Product Overview

Custom metal stamped electrical contacts produced to OEM engineering specifications for switchgear, control modules, and power distribution systems. These components serve as the primary conductive interface in electrical assemblies, delivering low contact resistance and high mechanical repeatability under continuous current load. Engineered for automated insertion equipment and high-speed assembly lines.
Technical Specifications
Product Classification: Custom Precision Stamped Electrical Contacts
Raw Material Options: ETP Copper (C11000), Brass (C26800), Phosphor Bronze (C51900), Beryllium Copper
Strip Thickness Range: 0.15 mm to 2.50 mm (±0.01 mm tolerance target)
Surface Treatments: Selective / Full Plating: Bright Tin, Matte Tin, Nickel, Silver (1–5 µm thickness range)
Tooling Capabilities: In-house progressive die design, high-speed stamping up to 800 strokes/min
Format Availability: Continuous reel-to-reel strip format or loose piece bulk packing
Core Advantages
Stamping Tolerance Control
Continuous inline vision systems verify bending dimensions and pitch alignment down to ±0.01 mm during high-speed production runs.
Stable Electrical Interface
Material temper selection and localized contact coining ensure consistent contact pressure, suppressing voltage drop and localized temperature rise.
Automated Assembly Ready
Formed on carrier strips with precise pilot hole spacing to eliminate jamming in automatic pick-and-place or feeding systems.
Product Performance Comparison
| Feature / Parameter | Custom Metal Stamped Contacts | Off-the-Shelf Standard Terminals |
| Footprint Alignment | Custom tab geometry and mounting pitch tailored to proprietary housing dimensions | Fixed standardized footprints requiring housing modifications |
| Current Capacity & Heat | Cross-sectional area scaled directly to specified amperage requirements | Generic ratings based on standardized wire gauge constraints |
| Supply Format | Carrier-strip packaging optimized for direct integration into automated assembly lines | Standard loose bulk packaging requiring manual sorting |
Production & Quality Assurance Flow
Material Incoming Verification
Alloy composition check via XRF spectrometry, strip thickness measurement, and tensile strength test.
Progressive Die Stamping
Multi-stage high-speed punching, coining, and forming with embedded die sensors to prevent tool damage.
Plating & Surface Finishing
Electroplating line operation for tin, nickel, or silver coating with X-ray fluorescence plating thickness measurement.
Final Inspection & Packaging
100% optical pin-to-pin pitch inspection, contact force testing, and vacuum sealing or reel packaging.
Material & Surface Treatment Options
Base Alloys:
Oxygen-free copper for high electrical conductivity (≥100% IACS); Phosphor bronze for elevated fatigue strength and spring retention; Brass for cost-effective structural contacts.
Plating Solutions:
Electrodeposited matte tin to prevent whiskers and maintain solderability; Nickel barrier underplating to stop copper diffusion; Silver plating for low contact resistance in higher current circuits.
Application Scenarios
- Low-voltage switchgear, circuit breakers, and relay contact blocks
- Industrial terminal strips and power distribution module interfaces
- Smart meter terminal assemblies and electrical disconnect switches
- Automotive junction boxes and high-current power connectors
Frequently Asked Questions
Q: What step files or drawing formats are required for tooling evaluation?
A: Technical reviews accept STEP, IGES, DXF, or 2D PDF files with dimensional tolerances, material temper notes, and plating specs.
Q: How is plating thickness verified across high-volume production batches?
A: Plating thickness is measured using calibrated X-ray fluorescence (XRF) equipment on defined contact zones according to ISO 2177 standards.


Hot Tags: custom metal stamped electrical contacts, China custom metal stamped electrical contacts manufacturers, suppliers, factory












