Neutral Busbar 3x30 10Pole

Neutral Busbar 3x30 10Pole

Details:
The Neutral Busbar 3×30 10Pole is a high-capacity, ten-pole neutral busbar intended for large three-phase four-wire power distribution systems, industrial VFD centers, data center UPS outputs, photovoltaic and energy storage AC combiner boxes, and main switchboards.

Send Inquiry
Description
Send Inquiry

Product Overview

product-800-533

The 3×30 10-pole copper bar is engineered for industrial distribution cabinets and heavy-duty control panels where multiple large-current neutral circuits land on a single bar. Ordinary thin copper bars tend to bow and deform once several high-current return circuits are concentrated on one bar, which loosens joints and raises contact resistance. This bar solves the problem at the source: a 3 mm thick hard-drawn C11000 copper profile with a 90 mm² effective cross-section stays rigid under full load, keeping every terminal torque-tight and dimensionally stable for years of continuous service.

 

Technical Specifications

 

 

Item

Specification

Busbar Cross-Section

3 mm × 30 mm (90 mm² effective)

Material

C11000 high-conductivity copper (99.9% Cu)

Number of Poles

10

Screw Specification

M5 (standard) / M6 (heavy-duty option)

Continuous Rated Current

Up to 300 A (free air, 30 °C ambient)

Pole Center Distance

18 mm or 25 mm (specify when ordering)

Overall Length

≈ 230 mm (18 mm pitch) / ≈ 260 mm (25 mm pitch)

Recommended Torque

2.5–3.5 N·m (M5) / 4.5–5.5 N·m (M6)

Hole Position Tolerance

± 0.1 mm

 

 
 
Core Advantages
01.

3 mm Thick, Stays Rigid

The 3 mm hard copper profile resists bending under full load, so multi-circuit neutral connections stay tight without re-work.

02.

90 mm² Large Cross-Section

Carries up to 300 A continuous current, sized for high-current return circuits in heavy equipment.

03.

10 Poles on One Bar

Consolidates up to ten return circuits in a single mounting, simplifying cabinet wiring and inspection.

04.

Tin-Plated, Low Maintenance

Electrolytic tin plating prevents oxidation, keeps contact resistance low, and eliminates periodic cleaning.

 

3 mm Hard Copper Bar vs Standard Thin Copper Bar

 

 

Comparison Dimension

3×30 Hard Copper Bar

Standard Thin Copper Bar

Rigidity under full load

Stays straight and rigid

Prone to bowing and deformation

Multi-circuit connections

Joints stay torque-tight

Loosening risk rises with load

Effective cross-section

90 mm²

Typically below 60 mm²

Contact area per pole

Full flat contact

Reduced contact surface

Long-term maintenance

No re-tightening needed

Periodic inspection required

 

Professional Production Process

 

Material Cutting → High-Precision Punching → Bending & Forming → Thread Tapping → Deburring & Chamfering → Electrolytic Tin Plating

 

Every step runs under ISO 9001-controlled inspection, with hole positions held to ± 0.1 mm so the bar mounts and lands wires exactly as designed.

 

Material & Surface Treatment Options
 

Base material

C11000 high-conductivity copper, 99.9% Cu, conductivity ≥ 58 MS/m (100% IACS) - combining high mechanical strength with low electrical resistance.

Surface treatment

Electrolytic tin plating, 3–5 μm standard / 5–8 μm heavy-duty, recommended for humid, coastal, or corrosive industrial environments. Bare copper and custom coatings available on request.

 

Application Scenarios

 

Industrial Distribution Cabinets

Serves as the main neutral bar in MDBs and floor-standing distribution cabinets handling multi-circuit return currents.

Heavy-Duty Control Panels

Ideal for control cabinets, motor control centers, and VFD cabinets where concentrated, harmonic-rich neutral currents demand a rigid bar.

New Energy & Data Infrastructure

Applied in PV and energy-storage AC combiner boxes, data center UPS outputs, and generator control panels.

 

 

Frequently Asked Questions

 

 

Q: Why does bar thickness matter for a neutral busbar?

A: When multiple large-current neutral circuits concentrate on one bar, thin bars bend under load and terminal torque loosens over time. The 3 mm thick hard copper profile provides the mechanical strength to stay rigid at full load, keeping every joint tight and contact resistance low.

Q: Can pole pitch, hole positions, or screw size be customized?

A: Yes. Standard options include 18 mm or 25 mm pole pitch and M5 or M6 screws. Custom hole patterns, lengths, and mounting holes can be produced from your drawings, and a CAD dimension drawing is available for every model.

Q: Do you provide samples before bulk orders?

A: Sample testing is available for engineering verification. Trial orders for new projects can be discussed, and volume pricing applies to bulk quantities.

 

product-3840-2160
product-3840-2160

 

Hot Tags: neutral busbar 3x30 10pole, China neutral busbar 3x30 10pole manufacturers, suppliers, factory, Ground Busbar 3x25 12Pole, Neutral Busbar 3x30 10Pole, Neutral Terminal 400A 25 To 70sqmm, Neutral Terminal 600A 35 To 95sqmm, Standalone Neutral Terminal 100A 10 To 35sqmm, Standalone Neutral Terminal 600A 35 To 95sqmm

Send Inquiry
Send Inquiry