Product Overview

The split spring lock washer is a helical locking washer made to DIN 127 and fitted under the nut or bolt head to keep threaded joints tight. Its open split works like a spring: it exerts a continuous reverse force against the mating surfaces, resisting the loosening caused by vibration and load changes in machinery and electrical assemblies.
The most common complaint about inferior washers is split ends that misalign or fracture, and uneven cuts that lead to locking failure. Ours are made from properly heat-treated spring steel with precision-finished cut ends, delivering dependable anti-loosening performance for general machinery assembly and distribution box bolt fastening.
Technical Specifications
Key parameters for procurement and engineering reference
|
Item |
Specification |
|
Product |
Split type helical spring washer, DIN 127 B |
|
Size Range |
M2 – M30 (other sizes per drawing) |
|
Material |
65Mn spring steel / SUS304 stainless steel |
|
Heat Treatment |
Quenched and tempered for stable spring force |
|
End Condition |
Precision-cut, flat and aligned, burr-free |
|
Function |
Reverse spring force prevents loosening under vibration |
|
Surface Treatment |
Plain (oiled) / phosphated / black oxide / zinc plated |
|
MOQ |
500 pcs (negotiable for trial orders) |
|
Samples |
Available for material and dimensional verification |
|
Lead Time |
5 – 15 business days after order confirmation |
|
Packaging |
Standard export cartons |
|
Customization |
OEM/ODM supported per customer drawings |
Core Advantages
Why buyers specify our washers for vibration-exposed joints
Lasting Rebound Force
Made from 65Mn spring steel or SUS304 stainless steel and heat treated for stable elasticity, each washer keeps its reverse thrust over long service instead of flattening after a few tightenings.
Precision-Treated Cut Ends
Every split end is machined flat and aligned. No fracture, no misaligned opening - the two defects that make inferior washers lose locking force or damage the joint.
Manufactured to DIN 127
Dimensions, hardness and finish follow the DIN 127 standard, so the washers drop straight into standard bolted assemblies and pass incoming inspection without rework.
Precision-Cut Washers vs Inferior Washers
A practical comparison for procurement decision-making
|
Comparison Dimension |
Precision-Cut Washer |
Inferior Washer |
|
Cut End Quality |
Flat, aligned, burr-free |
Rough cut, prone to misalignment |
|
Crack Resistance |
Clean split, no fracture |
Ends crack during tightening |
|
Rebound Force |
Heat treated, long-lasting |
Decays quickly, washer flattens |
|
Material |
Certified 65Mn / SUS304 |
Unverified mixed steel |
|
Standard |
DIN 127 dimensions and hardness |
No standard control |
|
Batch Consistency |
Inspected batch by batch |
Unstable between batches |
Professional Production Process
Spring Material Selection → Stamping & Splitting → Precision End Trimming → Heat Treatment → Surface Treatment → Inspection & Packing.
Heat treatment is the step that decides rebound performance. Every batch is treated and checked for elasticity and hardness, and split ends are trimmed flat before surface treatment, so locking force stays consistent from the first piece to the last.
Material & Surface Treatment Options
Match the material to your working environment and budget
65Mn Spring Steel
High elastic limit at economical cost, the standard choice for general machinery assemblies
Heat treated for lasting rebound force, supplied plain, phosphated or zinc plated
SUS304 Stainless Steel
Corrosion resistance for humid, outdoor and mildly chemical environments, no plating required
Retains spring force where plated carbon steel would rust
Surface treatments: plain (oiled) / phosphated / black oxide / zinc plated. Custom finishes available per requirement.
Application Scenarios
General Machinery Assembly
Installed under bolts on motor mounts, pumps, gearboxes and equipment frames, where running vibration gradually loosens plain threaded joints.
Distribution Boxes & Control Panels
Keeps busbar, component and terminal mounting bolts tight inside distribution boxes and control cabinets, where thermal cycling works joints loose over time.
Wholesale & Distribution
Bulk supply with stable heat-treatment quality across batches for fastener distributors and MRO stockists.
Frequently Asked Questions
Q: How does a spring lock washer prevent loosening?
A: Its helical split acts as a compressed spring between the fastener and the mating surface. The coil exerts a constant reverse force and its raised ends bite slightly, keeping clamp load on the joint even under vibration.
Q: Which material should I choose, 65Mn or SUS304?
A: 65Mn gives the strongest spring force at the lowest cost and suits most indoor machinery. Choose SUS304 where the joint faces moisture, outdoor exposure or mild chemicals, since it needs no plating.
Q: Can you supply non-standard sizes or surface treatments?
A: Yes. Standard DIN 127 sizes cover M2 to M30. Non-standard inner diameter, thickness or split gap can be made to your drawings, with surface treatments matched to your working environment.
Q: What is your MOQ and lead time?
A: MOQ starts from 500 pcs and trial quantities are negotiable. Standard lead time is 5 – 15 business days after order confirmation.


Hot Tags: split spring lock washer, China split spring lock washer manufacturers, suppliers, factory












