Product Overview

The keps nut is a pre-assembled combination fastener that pairs a hex nut with a free-spinning serrated washer. Built for electronics assembly and automated production lines, it removes the two problems that slow down traditional nut-and-washer installations: separate handling of loose washers, and washers that drop, scatter, or go missing between stations.
Because the captive washer never leaves the nut, operators and automatic screwdriving systems handle a single part - one motion, one fastener, one secure connection from the first piece to the last.
Technical Specifications
|
Item |
Specification |
|
Product Name |
Keps Nut (K-type serrated washer nut / K-nut) |
|
Structure |
Hex nut with captive, free-spinning serrated washer |
|
Thread Sizes |
M2 – M8 (custom sizes on request) |
|
Base Material |
Carbon steel / Stainless steel / Brass |
|
Surface Treatment |
Zinc plating (blue / white), nickel plating, black oxide |
|
Key Functions |
Anti-loosening + electrical grounding |
|
Installation |
One-step fastening; compatible with automatic screwfeeding |
|
Customization |
OEM/ODM per drawings or samples |
|
MOQ |
5,000 pcs per specification (trial orders negotiable) |
|
Quote Turnaround |
Within 24 hours |
Core Advantages
Captive Free-Spinning Washer
The washer rotates freely for fast run-down, yet never separates from the nut. Nothing falls onto the floor, into the product, or out of the kit.
One-Step Installation
No washer alignment, no second handling. Manual assemblers and automated screwdriving stations complete each joint in a single operation, cutting assembly time and raising line efficiency by up to 30%.
Serrated Bite: Grip + Grounding
Hardened teeth bite into the mating surface at final tightening, locking the joint against vibration and maintaining a low-resistance electrical grounding path.
Keps Nut vs Traditional Nut + Loose Washer
|
Dimension |
Keps Nut |
Traditional Nut + Loose Washer |
|
Parts handled per joint |
One |
Two |
|
Washer loss & rework |
None - washer is captive |
Frequent drops, downtime, rework |
|
Assembly steps |
One-step fastening |
Align washer, then thread nut |
|
Automation compatibility |
Feeds cleanly, single part |
Loose washers tangle feeders |
|
Anti-loosening |
Serrations lock into surface |
Needs separate spring washer |
|
Electrical grounding |
Built-in serrated contact |
Depends on separate washer fit |
Professional Production Process
Raw Material Inspection → Cold Heading → Thread Rolling → Washer Stamping & Serration Forming → Captive Assembly → Heat Treatment → Surface Plating → Final Quality Inspection
Every batch is torque-tested and salt-spray checked to confirm serration grip, plating adhesion, and stable grounding performance before shipment.
Material & Surface Treatment Options
Carbon Steel
Cost-effective choice for high-volume electronics assembly; zinc or nickel plated for corrosion resistance.
Stainless Steel 304
Built-in corrosion resistance for demanding environments; no plating required.
Brass
Excellent conductivity for grounding-critical connections.
Surface finishes: blue/white zinc, nickel plating, black oxide; custom coatings available per requirement.
Application Scenarios
Electronics Assembly
Mounting PCBAs, fans, modules, and covers inside electronic enclosures, where loose washers are easily dropped into finished products.
Automation Equipment
Robotic screwdriving cells and fixture building: one-part feeding keeps stations running without washer-jam stoppages.
Control Cabinets & Metering Devices
Panel and component fixing that also requires a dependable grounding path through the serrated face.
Frequently Asked Questions
Q: What is a keps nut, and how is it different from a regular hex nut?
A: A keps nut is a hex nut with a pre-assembled, free-spinning serrated washer. The washer cannot fall off, so the fastener installs in one step, and the serrations deliver anti-loosening grip and electrical grounding in the same part.
Q: Does the captive washer still rotate during installation?
A: Yes. The washer spins freely while running down and only bites into the mating surface at final tightening, so installation stays smooth without extra torque.
Q: Can keps nuts be used in automated screwfeeding systems?
A: Yes. The single-part design feeds cleanly through vibratory bowls and pick-and-place stations. Size, hardness, and plating can be matched to your line.
Q: What is the MOQ, and how fast can I get samples?
A: Standard MOQ starts from 5,000 pcs per specification, with trial quantities negotiable. Quotes are returned within 24 hours, and samples are available for testing before bulk orders.


Hot Tags: keps nuts, China keps nuts manufacturers, suppliers, factory












