Product Overview

Two Inlet Four Outlet 35 To 70sqmm is a dual-redundant heavy-duty distribution block that lands two electrically isolated A/B inlets and four outgoing branches in one body. It takes 35 mm² to 70 mm² copper cable directly, so a high-power incoming cabinet or a transformer secondary panel no longer needs two single-feed blocks wired side by side.
The wide-mouth wire cage is the point of the design. Large cross-section cable is stiff and awkward to bend, and a round brass post forces the installer to curve the conductor before a screw can bite. Here the conductor drops straight into an open cage from the front and the clamp closes over it, so the joint stays tight under vibration and thermal cycling.
Each incoming feed is rated 400 A, giving 800 A across the pair, and each of the four outlets is rated 100–160 A. Every branch re-terminates on its own, so one outlet can be reworked without disturbing the other three.
Technical Specifications
| Parameter | Value |
| Incoming Feeds | 2 (A/B dual feed, electrically isolated) |
| Outgoing Branches | 4 |
| Wire Range | 35 mm² – 70 mm² (copper) |
| Current Capacity | 400 A per feed (800 A total) |
| Outlet Rating | 100–160 A per outlet |
| Rated Voltage | 1000 V AC/DC |
| Contact Resistance | ≤0.35 mΩ |
| Dielectric Strength | ≥2.5 kV |
| Creepage Distance (A/B isolation) | ≥8 mm |
| Torque Rating | ≥3.0 N·m |
| Housing Material | PC, UL94 V-0 |
| Operating Temperature | -40 °C to +105 °C |
| Customization | OEM / ODM supported per customer drawings |
| MOQ | Depends on configuration; trial orders negotiable |
| Quality Guarantee | 12–24 months from shipment date |
| Manufacturing Standard | ISO 9001 quality management system |
| Packaging | Standard export packaging |
| Delivery Ports | Ningbo Port / Shanghai Port |
| Quote Turnaround | Within 24 hours |
Core Advantages
Four points that decide whether a 35–70 mm² dual feed can be wired inside a crowded cabinet.
Wide-Mouth Wire Cage Accepts 35–70 mm² Cable
The cage opens wide enough for a full 70 mm² conductor to enter straight, with no strand trimming at the bench and no pre-forming. A narrow post terminal forces the installer to bend stiff cable to a radius the panel often has no room for.
Direct Insertion Without Pre-Bending
Thick cable is hard to bend and the bend radius eats panel depth. Front entry keeps the conductor in its natural run, which shortens wiring time on site and cuts the chance of a badly seated strand at the joint.
High Clamping Force Against Pull-Out
The clamp bears on the full conductor rather than on a single screw point, so the cable resists pull-out and loosening under vibration. Rated torque is ≥3.0 N·m while contact resistance is held at ≤0.35 mΩ.
Compact Dual-Feed Body Saves Rail Space
Two feeds and four branches share one compact body instead of two single-feed blocks, cutting panel space by roughly 50% and removing the inter-block wiring that is a common source of error. A transparent cover with laser-etched A/B identification lets circuits be traced without opening the panel.
Wire Cage Terminal vs Traditional Brass Terminal
The difference shows up when the cable is inserted, and again at the first re-torque.
| Point Of Comparison | Wire Cage Terminal (This Block) | Traditional Brass Terminal |
| Cable entry | Open cage; conductor enters straight from the front | Round post or bar; conductor must be wrapped or looped |
| 35-70 mm² cable | Fits without pre-bending or strand trimming | Stiff cable must be bent to reach the post |
| Clamping force | Clamp closes over the full conductor | Pressure applied at a single screw point |
| Contact stability | Broad face contact, ≤0.35 mΩ | Point contact, sensitive to how it was torqued |
| Re-termination | Any of the 4 branches can be reworked on its own | Rewiring one feed often disturbs the others |
| Dual-feed panel space | One block, roughly 50% less rail space | Two separate blocks plus inter-block wiring |
Professional Production Process
Every unit follows the same five steps, and the test results are recorded per batch.
Material & Surface Treatment Options
Two decisions are worth settling before the order is placed.
Busbar And Conductor Parts
Copper busbar carries the 400 A per feed. Plating and surface treatment are set at order stage, so confirm the option you need against the drawing - it affects contact resistance and how the joint behaves in a damp or corrosive enclosure.
Flame-Retardant PC Housing
The body is PC rated UL94 V-0, and the block is rated from -40 °C to +105 °C. That range covers outdoor cabinets and enclosure interiors that heat up in service.
Application Scenarios
Three places where a 2-in / 4-out 35–70 mm² block earns its rail space.
Industrial Incoming Cabinets
High-power incoming cabinets fed from two sources need both feeds landed and four outgoing runs distributed without doubling the rail. The isolated A/B inlets keep the two supplies electrically separate all the way through the block.
Transformer Secondary Outgoing
On the secondary side the 35–70 mm² cable is stiff and the runs are short. Front-entry cages let a contractor land a full 70 mm² conductor without fighting a bend, and the 100–160 A outlets line up with typical branch protection.
Redundant Dual-Feed Systems
The same block suits data centre dual-feed architecture, energy storage cabinets with redundant battery clusters, and telecom backup distribution, where two independent feeds have to reach four branch circuits from one footprint.



Hot Tags: two inlet four outlet 35 to 70sqmm, China two inlet four outlet 35 to 70sqmm manufacturers, suppliers, factory, distribution terminals, Jack Up One Inlet Six Outlet 10 To 35sqmm, Jack Up One Inlet Two Outlet 10 To 25sqmm, Single Pole One Inlet Eight Outlet, Single Pole One Inlet Five Outlet, Single Pole One Inlet Six Outlet












