Product Description
A brass male to female threaded adapter with a hex base and an internal bore converts a port whose thread does not match the incoming part. The outer thread fits the equipment, the inner thread takes the mating part, and the hex section allows controlled wrench installation.
Product Parameters
Made to order only: the tables below list the positions you define.
Configuration Options To Specify
Fixed at quotation stage; anything undefined uses a general tolerance.
|
Design Position |
Information to Specify |
|
Equipment side |
Outer thread diameter, pitch and engagement length |
|
Component side |
Inner thread diameter, pitch and usable depth |
|
Installation tool |
Hex size, drive slot or alternative drive |
|
Internal passage |
Open, stepped, restricted or blind |
|
Seating area |
Flat face, shoulder or chamfer |
|
Installation depth |
Flush, recessed or projecting |
|
Material |
Brass, stainless steel, aluminum or specified alloy |
|
Finish |
Uncoated, polished, nickel plated or specified finish |
Typical Capability
Ranges hold at prototype and production quantity.
|
Parameter |
Custom Range |
|
Outer thread |
Metric or inch specification |
|
Inner thread |
Same or different standard from outer thread |
|
Thread direction |
Right-hand or left-hand |
|
Body length |
Drawing-specific |
|
Hex profile |
Standard or reduced wrench size |
|
Bore layout |
Straight, stepped, blind or restricted |
|
Dimensional accuracy |
Based on marked drawing tolerances |
|
Order type |
Prototype, trial batch or repeat production |
Manufacturing And Inspection
Profile CNC turned; the inner passage is bored before the two threads are machined, with hex flats and end slots as secondary operations. Thread gauges inspect marked threads.
Product Advantages
Engineering fact and the result on your line.
|
Advantage |
Engineering Fact |
Buyer Benefit |
|
Thread conversion at the port |
Outer and inner threads are machined independently to two specifications. |
No re-tapping of the housing, no adapter stack, and the existing mating component stays unchanged. |
|
Hex base for controlled torque |
A hex section accepts a standard wrench, so torque is applied through the flats. |
Repeatable tightening without crushing the thread or distorting a thin-walled body. |
|
Drive slot for restricted space |
An end-face slot is added as a secondary operation when the drawing calls for it. |
Installation in recessed countersinks and tight pockets that no wrench can reach. |
|
Bore built for the function |
Counterbore, internal shoulder, blind end or two bore diameters in one turning sequence. |
Thread conversion and axial positioning by one part instead of an adapter plus a spacer. |
|
Made from your dimensions |
No fixed catalogue configuration; every version follows your drawing or sample. |
Prototype, trial batch and repeat production stay interchangeable on one released drawing. |
Product Applications
Sensor mounting, port conversion and panel entries taking a different thread.
Drawing Information And Quotation Request
Identify the two threads separately, and show the seating direction and installation depth.
|
Information Required |
What It Determines |
|
Outer thread specification |
Equipment-side fit: thread diameter, pitch and engagement length |
|
Inner thread specification |
Component-side fit: thread diameter, pitch and usable depth |
|
Body and hex dimensions |
Wrench clearance and how far the adapter sits into the port |
|
Installation direction |
Thread direction and orientation of the seating face |
|
Material requirement |
Corrosion resistance, weight and machinability |
|
Finish requirement |
Uncoated, polished, nickel plated or specified finish |
|
Annual or order quantity |
Order type and unit cost |
Hot Tags: brass male to female threaded adapters with hex base and internal bore, China brass male to female threaded adapters with hex base and internal bore manufacturers, suppliers, factory
