Single Hole Mechanical Lug Screw Terminal Connector For Circuit Breakers

Single Hole Mechanical Lug Screw Terminal Connector For Circuit Breakers

Details:
Products Description This single-hole mechanical lug employs a robust screw-clamp design to establish a removable, high-pressure cable joint inside circuit breakers, distribution enclosures, and industrial control gear. A stripped conductor is inserted directly into the main barrel of the metal...

Send Inquiry
Description
Send Inquiry

Products Description

 

product-730-730

 

This single-hole mechanical lug employs a robust screw-clamp design to establish a removable, high-pressure cable joint inside circuit breakers, distribution enclosures, and industrial control gear. A stripped conductor is inserted directly into the main barrel of the metal body. Driving the captive pressure screw pushes the wire firmly against the internal contact surface, creating a secure low-resistance interface. The top eyelet is used to bolt the connector to a bus bar, breaker pad, or equipment frame. The part is aimed at OEMs and panel builders who need a terminal body machined to their own spatial envelope-it is never restricted to a single breaker model or a predetermined cable diameter.

Customization Parameters

 

Every geometry is built to the buyer's specification. The following connection features are defined at the design stage:

 

Incoming Conductor – wire type (copper, aluminium) and cross-sectional area.

Cable Entry Port – bore diameter and conductor insertion depth.

Clamping Screw – thread specification, drive style (hex, slotted, etc.) and maximum tightening torque.

Mounting Interface – single-hole diameter and its center position relative to the conductor axis.

Body Envelope – maximum length, width and height allowed in the installation space.

Contact Pad – required contact face geometry and surface finish (bare, tinned, silver-plated, etc.).

product-730-730

 

Material Choices
 

Lightweight aluminium alloys are a popular selection where economy and mass reduction matter. The grade should be matched to the electrical conductivity, machinability, and mechanical strength required. Fastener options include zinc-plated steel or stainless steel for the pressure screw. When copper conductors are landed in an aluminium body, galvanic compatibility, plating strategy, and long-term joint stability must be reviewed for the complete connection system. 

 

 

Manufacturing Steps

 

 

Connector blanks are prepared from extruded profiles or machined bar stock. Holes for the cable and the mounting fastener are drilled to precise positions, and the screw pocket is tapped. Contact pads and peripheral edges then receive a finishing operation. A typical production sequence covers

1

Cutting stock to length

2

Drilling the conductor bore

3

Machining the mounting hole

4

Thread tapping

5

Deburring all edges

6

Surface finishing the contact area and body

7

Installing the set screw

 

Quality Inspection Points

Each batch undergoes dimensional and functional verification

Conductor Bore – checked for diameter, insertion depth, and absence of burrs.

Screw Thread – go/no-go thread gauge inspection and engagement length.

Mounting Hole – positional accuracy and fit on the mating component.

Contact Surface – flatness and texture of the pad.

Body Outline – overall dimensions stay within the permitted installation envelope.

Screw Assembly – drive fit and smooth tightening action.

 

product-730-730

 

Electrical Validation

The metal housing can be fabricated to the specified mechanical dimensions, but the permissible ampacity is set by the assembled connection as a whole. Conductor size, alloy conductivity, contact force, tightening torque, and temperature rise interact and must be evaluated together. Any declared current rating, breaker compatibility statement, or product certification is therefore confirmed only after the customer supplies the relevant technical requirements and applicable test criteria.

 

How to Request a Quote

Please provide the following data so that we can prepare a sample or volume production quotation

 

Dimensional drawing of the body, or a physical sample

 

Cable material and cross-section

 

Required conductor insertion depth

 

Screw size and tightening torque

 

Mounting-hole details

 

Desired contact finish

 

Trial and production quantities

 

 

 

 

 

Hot Tags: single hole mechanical lug screw terminal connector for circuit breakers, China single hole mechanical lug screw terminal connector for circuit breakers manufacturers, suppliers, factory

Send Inquiry
Send Inquiry