Product Description

The Three Phase Clearance Connector 60A is a compact terminal block engineered for incoming and outgoing cable connection and isolation protection in three-phase AC circuits rated at 60A. Designed for commercial energy metering panels and distribution boards in small and medium factories, it combines a rigid polycarbonate housing, tinned copper contacts and high-torque anti-loosening screws in one touch-safe module.
Instead of loose terminal strips that gradually back out and overheat, panel builders get a fixed wiring point that keeps every joint tight, cool and easy to inspect throughout the panel's service life.
Technical Parameters
Typical ratings of the 60A three-phase terminal block family are listed below. Exact values are confirmed against your panel drawing or our datasheet, both available on request.
|
Parameter |
Value |
|
Rated continuous current |
60A |
|
Rated voltage |
275VAC (L-N / L-G), 440VAC (L-L) |
|
Wire range (copper) |
10–25 mm² (8–4 AWG) |
|
Terminal type |
Tubular screw, recommended tightening torque ≥ 1.2 N·m |
|
Anti-loosening design |
High-torque combination-slot screw (flat + cross driver) |
|
Contact material |
Tinned copper |
|
Housing material |
Flame-retardant polycarbonate (PC) |
|
Operating temperature |
-40°C to +85°C |
|
Mounting |
Panel mount (screw) or DIN rail (adapter) |
|
Dimensions (typical) |
160 × 110 × 65 mm (varies by model) |
|
Certifications |
CE / TUV / RoHS - test reports available on request |

Product Advantages
Each advantage below pairs an engineering fact with the benefit it delivers on site.
|
Advantage |
Engineering Fact |
Buyer Benefit |
|
High-torque anti-loosening screws |
Combination-slot screws clamp 10–25 mm² conductors at torque ≥ 1.2 N·m and resist backing out under vibration and thermal cycling. |
Stable contact pressure keeps joints cool, prevents hot spots at 60A and cuts callback maintenance. |
|
Tinned copper contacts |
Copper contact surfaces are tin-plated to resist oxidation and galvanic corrosion over years of service. |
Low, stable contact resistance under full 60A continuous load extends the panel's service life. |
|
Rigid PC housing |
Flame-retardant polycarbonate resists cracking and tracking even under localized thermal distress. |
Touch-safe insulation protects maintenance staff and survives harsh installation environments. |
|
Clear phase layout |
L1 / L2 / L3, N and PE are arranged in a fixed sequence with permanent marking. |
Faster wiring, fewer connection errors and quick visual inspection for panel builders. |
precautions for product use
The connector is a rugged wiring and isolation point for three-phase commercial energy metering cabinets, where utility-grade connections must stay tight between inspection cycles. It also serves distribution boards in small and medium factories, HVAC and pump control panels, and lighting power distribution in malls and office buildings.
With an operating range of -40°C to +85°C, it keeps performance in outdoor cabinets, rooftop equipment rooms and other sites where wide temperature swings would loosen ordinary terminals.
FAQ

Hot Tags: three phase clearance connector 60a, China three phase clearance connector 60a manufacturers, suppliers, factory, meter connectors, three phase connectors, Three Phase Integrated Clearance Connector, Three Phase Integrated Interference Connector, Three Phase Interference Connector 100A, Three Phase Interference Connector 60A












